Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the steering wheel controls of the Citroen C4

Model: Citroen C4 MK 2 - Years 2010-2018
Part: Push button

The following steps will show us how to disassemble and replace the steering wheel controls of the Citroen C4, following the instructions below. First, we get into the car and start by removing the steering wheel airbag, unscrewing the side screw and disconnecting the electrical connector found on the back, as shown in the video. At this point, we remove the steering wheel buttons, also disconnecting the wiring; clean or replace the controls, and finally reassemble the steering wheel airbag, connecting it back!

Posted on 6 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the central controls of the Citroen C4 dashboard
How to disassemble the central controls of the Citroen C4 dashboard
Citroen C4 (2004-2010 / MK 1) In this video tutorial we will see the instructions that will allow us to disassemble the central controls of the dashboard, which include the car ra…
How to disassemble the steering wheel airbag in the Citroen C4?
How to disassemble the steering wheel airbag in the Citroen C4?
Citroen C4 (2004-2010 / MK 1) In this tutorial, we can see how to disassemble the steering wheel airbag in the Citroen C4, an extremely simple and quick operation. Before proceedi…
How do you disassemble the dashboard of the Citroen C4?
How do you disassemble the dashboard of the Citroen C4?
Citroen C4 (2010-2018 / MK 2) For clarity, the car featured in the video is a Citroen C4 Picasso, but considering that the technical sequence of the work in question is almost ide…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos