Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light of the Citroen C4

Model: Citroen C4 MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

This video shows how to reset the instrument cluster of a Citroen C4 from the service light after changing the oil and filters. First, get in the car and close the doors.

With the ignition off, press the button located to the left of the central display, and hold it down while starting the vehicle with the key or the start button. On the right side of the screen, a countdown will begin on the instrument cluster: when it reaches zero, you can release the button and turn off the ignition.

To ensure the operation was successful, turn the ignition back on and check that the light has turned off.


Updated on 14 October 2026 by ScegliAuto


Related tutorials

How to reset the tire pressure sensor on the Citroen C4
How to reset the tire pressure sensor on the Citroen C4
Citroen C4 (2020-2026 / MK 3) In a few simple steps, we will see how to reset the tire pressure warning light on the Citroen C4; before resetting the TPMS sensors, it is necessary…
Resetting the Service Warning Light on a Citroen C4
Resetting the Service Warning Light on a Citroen C4
Citroen C4 (2010-2018 / MK 2) Today, we will look at how to reset the service light for the routine maintenance oil change on a Citroen C4. First, get inside the vehicle and press…
How to Reset the Flat Tyre Warning Light on a Citroen C4
How to Reset the Flat Tyre Warning Light on a Citroen C4
Citroen C4 (2020-2026 / MK 3) This guide shows how to reset the flat tyre warning light on a new generation Citroen C4. Before proceeding, check the correct pressure of all four t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos