Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the rear door panel and speaker of the Citroen C4 Cactus.

Model: Citroen C4 Cactus - Years 2014-2020
Part: Door trim panel

The instructions in this guide will show us how to disassemble the rear door panel and speaker of the Citroen C4 Cactus. First, we open the rear door and start unscrewing all the fastening screws we find on the sides, using a screwdriver or Torx key; then we lever on the sides of the panel to detach and remove it, disconnecting the handle cable, as shown in the video. At this point, it is shown how to disassemble and replace the rear door speaker, applying the reverse process for reassembly of the panel!

Posted on 14 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Speakers in a Citroen C4 Cactus
Replacing the Speakers in a Citroen C4 Cactus
Citroen C4 (2014-2020 / Cactus) Briefly, we will see the instructions that will allow you to remove and replace the speakers in a Citroen C4 Cactus. First, open the front door of th…
Removing the Door Panel of the Citroen C4 Cactus
Removing the Door Panel of the Citroen C4 Cactus
Citroen C4 (2014-2020 / Cactus) Here’s how to remove the front door panel of the Citroen C4 Cactus in simple steps. First, open the front door of the vehicle and start by removing t…
How to Remove the Door Panel of the Citroen C4 Cactus
How to Remove the Door Panel of the Citroen C4 Cactus
Citroen C4 (2014-2020 / Cactus) In a few simple steps, we will see the procedure for removing the front door panel of the Citroen C4 Cactus. First, open the front door of the vehicl…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos