Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Dacia Sandero

Model: Dacia Sandero BS - Years 2008-2012
Part: Tire pressure warning light

To reset the tyre pressure warning light on a Dacia Sandero, first, start the car. The warning light of interest is located on the left-hand dial. Now, press the button on the top of the lever to the right of the steering wheel (as shown in the images) until the message "Set up" appears in the first dial on the right of the dashboard. Keep holding the same button until the warning light on the left-hand dial goes out. With this last operation, you have completed the procedure and can now switch off the ignition and the engine.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on the 2018 Dacia Sandero
How to Reset the TPMS Light on the 2018 Dacia Sandero
Dacia Sandero (2012-2020 / B8) Today, you will learn how to reset the tyre pressure monitoring system (TPMS) light on a 2018 Dacia Sandero. It is important to perform the reset pro…
How to reset the TPMS light on the Dacia Sandero
How to reset the TPMS light on the Dacia Sandero
Dacia Sandero (2012-2020 / B8) When the TPMS light comes on in the Dacia Sandero vehicle, it means that the tire pressure needs to be adjusted. Before resetting the light, we need …
How to reset the tyre pressure warning light on a Dacia Sandero?
How to reset the tyre pressure warning light on a Dacia Sandero?
Dacia Sandero (2012-2020 / B8) To reset the tyre pressure warning light on a Dacia Sandero, insert the key into the lock and turn it to activate the instrument cluster. Then, repea…

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2021-2028 - How do you reset the tire pressure warning light on the Dacia Sandero Stepway? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos