Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front door panel of the Dacia Duster

Model: Dacia Duster HM, MK 2 - Years 2017-2024
Part: Door trim panel

These short and simple steps will show us how to disassemble the front door panel of the Dacia Duster. First, we open the front door of the car and start by removing the plastic cover of the handle; then we unscrew the fixing screws we find underneath, removing the plastic cover of the opening handle, as shown in the video. At this point, we remove the speaker cover and unscrew the screws located on the sides of the panel, in order to detach and remove it; finally, we disconnect the electrical connector of the window switch panel and the handle cable!

Posted on 15 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel of a Dacia Duster
How to Remove the Front Door Panel of a Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Before starting, open the front door of your Dacia Duster. First, unclip and remove the window switch from its housing, then disconnect the electrica…
Replacement of the door speakers of the Dacia Duster.
Replacement of the door speakers of the Dacia Duster.
Dacia Duster (2010-2017 / HS, MK 1) In this guide, we will see the instructions that will allow us to disassemble and replace the front door speakers of the Dacia Duster. First, we open…
How to disassemble the door panel of a Dacia Duster?
How to disassemble the door panel of a Dacia Duster?
Dacia Duster (2017-2024 / HM, MK 2) To remove the door panel of a Dacia Duster, start by unclipping and removing the speaker. Next, locate the Torx screws positioned around the perimete…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos