Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the rear tail light bulb of the Dacia Duster MK2

Model: Dacia Duster HM, MK 2 - Years 2017-2024
Part: Tail light

In this video we can see how to change the rear lamp of the Dacia Duster MK2: first of all we need to open the rear door and, on the side of the lamp we need to change, we need to look for a sort of removable panel, corresponding to the lamp but from inside the trunk. Here we find two butterfly handles: we turn them counterclockwise to remove the screw underneath. Once the two screws are removed, we will have to disconnect the electrical connector that supplies power to the lamps, loosen the four clips on the sides and then we can remove the panel with the bulbs. Replace the burnt one, remembering never to touch the new one with bare hands, as this would limit its lifespan. To remove it, simply press it and turn it a quarter turn counterclockwise. Then we can put everything back in place following the reverse path. Good job.

Posted on 6 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Dacia Duster (2010-2017 / HS, MK 1) To independently replace the rear light bulb of your Dacia Duster (2010-2017), carefully follow the steps in this guide. First, park the car safely a…
Dacia Duster (2017-2024 / HM, MK 2) Replacing the front headlight bulb of the Dacia Duster model 2 can be done independently. Let's start by opening the front hood and proceed with remo…
Dacia Duster (2017-2024 / HM, MK 2) Today's information will allow us to disassemble and replace the rear taillight and its bulbs of the Dacia Duster. First, we open the rear tailgate o…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos