Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the brake pads of a Dacia Sandero

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Brake pads

See other generations:
Video tutorial

Let's see how to change the brake pads of a Dacia Sandero: first of all, lift the vehicle and remove the front wheels, open the brake fluid reservoir, then remove the caliper where there are two screws, one below and one on top that we must remove both, then we must clean, also the brake caliper, with a metal brush and a brake cleaner.

While we're at it, let's also clean the hubs.

Let's also reassemble the anti-noise plates on the brake pads, which will prevent annoying squeaks from the brakes, especially from new ones, together with the special paste to apply on the top of the pads, let's reassemble the hub and the wheel and do everything also on the other side.


Posted on 28 May 2025 by ScegliAuto


Related tutorials

Replacing Brake Pads on Dacia Sandero
Replacing Brake Pads on Dacia Sandero
Dacia Sandero (2008-2012 / BS) Replace the front brake pads on a Dacia Sandero. Lift the car on a column lift to the desired height. Remove the wheel using a telescopic spanner or …
How to Replace the Front Brake Pads on a Dacia Sandero?
Dacia Sandero (2008-2012 / BS) To replace the front brake pads on a Dacia Sandero, lift the car using a jack so that the corresponding front wheel is not in contact with the ground…
How to Replace the Front Brake Pads on a Dacia Sandero
How to Replace the Front Brake Pads on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Below, you will discover the information that will allow you to remove and replace the front brake pads on a Dacia Sandero in simple steps. First, li…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos