Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil on the 2024 Dacia Jogger

Model: Dacia Jogger MK 1 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Engine oil

Video tutorial

Today, we will explain how to change the engine oil on a 2024 Dacia Jogger. To begin, lift the vehicle on a ramp or axle stands to remove the lower engine cover using an electric screwdriver.

Using an 8 mm Allen key, unscrew the oil drain plug and let the oil drain into a container. Meanwhile, unscrew the nut of the oil filter housing and remove the filter.

Remove the old gasket from the cover and insert a new one after lubricating it with oil; insert the new filter into the housing and screw on the cover. Also screw in the drain plug with the replaced gasket and refit the engine cover.

Lower the vehicle and open the bonnet; remove the oil level dipstick and pour new engine oil into the reservoir. Finally, reinsert the dipstick and close the bonnet; start the engine and let it run for a few seconds, then turn off the engine and check the oil level using the dipstick.


Posted on 7 September 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Warning Light on a Dacia Jogger?
How to Reset the Tyre Warning Light on a Dacia Jogger?
Dacia Jogger (2021-2026 / MK 1) If you own a Dacia Jogger and are wondering what the correct procedure is to complete the manual reset of the tyre warning light, just read the follo…
Where Is the OBD Port on the Dacia Jogger?
Where Is the OBD Port on the Dacia Jogger?
Dacia Jogger (2021-2026 / MK 1) In this new guide for all of you who own a Dacia Jogger, we will help you easily find the OBD port of the car so you can connect a diagnostic tool an…
Where is the OBD2 port located on the Dacia Jogger 2022
Where is the OBD2 port located on the Dacia Jogger 2022
Dacia Jogger (2021-2026 / MK 1) Locating the OBD2 port on your Dacia Jogger (2022 model) is very simple, just follow the steps outlined in this guide. First, open the driver's side …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos