Do it yourself
Frequently asked questions about cars and motorcycles

How to Disable ESP on Dacia Sandero 2

Model: Dacia Sandero B8 - Years 2012-2020
Part: Checks and maintenance

In this brief video tutorial, follow the instructions to disable traction control or ESP on a second-generation Dacia Sandero, as well as other models from the manufacturer. First, get in the vehicle and turn on the ignition; then press the button located on the left side of the steering wheel, as shown in the video. This will illuminate a warning light on the dashboard indicating that traction control is disabled. It is important to note that driving with ESP disabled can be dangerous: therefore, it is advised never to disable the vehicle's traction control.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Dacia Sandero (2021-2026 / MK 3) In this video, you will see how to disable the ESP/TSC on a Dacia Sandero by safely installing a switch with a relay. A simple switch is not sufficie…
Dacia Sandero (2012-2020 / B8) In this video we can see how to deactivate the ESC/ESP system on a Dacia car: even though generally this system helps on snow, when it is as deep as …
Dacia Sandero (2012-2020 / B8) This tutorial shows how to deactivate and reactivate the passenger airbag in a Dacia Sandero Stepway, a procedure to be performed whenever a rear-fac…

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the outside temperature sensor on the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the LPG filter located in the Dacia Sandero? Read answer
    • Sandero 2021-2028 - When to service the petrol Dacia Sandero? Read answer
    • Sandero 2012-2020 - Where is the washer fluid reservoir on the Dacia Sandero? Read answer
    • Sandero 2021-2028 - How many km can the Dacia Sandero travel in reserve? Read answer
    • Sandero 2012-2020 - Where is the horn of the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the fuse box of the Dacia Sandero Stepway located? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos