Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel of a Dacia Duster

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Door trim panel

Before you can start, open the rear door of your Dacia Duster. First, detach and remove the window switch using a flathead screwdriver. Next, unclip and remove the speaker cover with the same screwdriver. This will reveal the screws that secure the door panel to the door itself. Proceed to unscrew and remove these screws, then disconnect the handle cable and remove the handle. At this point, using a thin but sturdy tool and applying leverage, unclip the internal support hooks. Once you complete this last step, you can finally remove the door panel, successfully finishing the disassembly.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel of a Dacia Duster?
How to Remove the Rear Door Panel of a Dacia Duster?
Dacia Duster (2010-2017 / HS, MK 1) Before starting, open the rear door of your Dacia Duster. Begin by removing the clip that secures the window lift handle, then remove the handle itse…
Removing Interior Panel on Dacia Duster
Removing Interior Panel on Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Removing the rear panel of the Duster? Open the door and begin disassembly of the panel. Remove the window winding handle, undo the screws located in…
How to Remove the Front Door Panel of a Dacia Duster
How to Remove the Front Door Panel of a Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Before starting, open the front door of your Dacia Duster. First, unclip and remove the window switch from its housing, then disconnect the electrica…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos