Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Duster
    4. : How to remove the rear door panel of a Dacia Duster?

Dacia Duster - Video tutorial

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Door panel
Operation: How to remove the rear door panel of a Dacia Duster?

Before starting, we will have to go and open the rear door of our Dacia Duster. Using a screwdriver and leveraging, we begin by disengaging and removing the clip that secures the window lifter lever, and then disengaging and removing the throttle itself. After that, we will have to unscrew and remove the screw that secures the internal opening handle, and then disengage and remove the handle itself and the lower speaker cover. At this point, we will have to unscrew and remove the screws that secure the door panel to the door itself, then unhook the internal hooks, and we will have finished the disassembly.


Posted on 20 January 2024 by ScegliAuto



How to remove the rear door panel of a Dacia Duster?
Dacia Duster (2010-2017 / HS, MK 1) Before starting, we will have to open the rear door of our Dacia Duster. So let's start by removing the clip that secures the window lifter lever, an
How do you remove the rear seats of the Dacia Duster car?
Dacia Duster (2010-2017 / HS, MK 1) The video focuses on cleaning the upholstery of the rear seats of a Dacia Duster but also shows how to detach them. It is all very simple: on the Dac
How to remove the rear door panel of a Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Before we can start, we will have to go and open the rear door of our Dacia Duster. We then begin to unhook and remove the window lifter lever, with

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos