|
Do it yourself
| |||
| ||||
How to Check Fluid Levels on the Dacia Duster MK3
Model: Dacia Duster
P1310
- Years:
2024, 2025, 2026
Video tutorial
Proper vehicle maintenance involves keeping an eye on the engine fluid levels, as shown in this video for the Dacia Duster MK3. Always perform these checks with the engine cold, so open the bonnet, which will stay up on its own thanks to the hydraulic struts. Check the oil level by removing the prominent yellow ring attached to the dipstick: clean it, reinsert it, and then pull it out again. The correct level is between "min" and "max": if it is below minimum, top up with oil that matches the specifications in the owner's manual, using the yellow filler neck nearby. The coolant reservoir is located on the right side of the engine bay. Again, the correct level is between "min" and "max". Only top up with fluid of the same colour as that in the reservoir. The brake fluid container is located on the opposite side, above the battery, and the level must never drop below the minimum. The windscreen washer fluid reservoir is found at the top right near the windscreen; fill until you can see the fluid: do not fill with water. The battery is maintenance-free, and if it needs to be replaced, it is recommended to consult an authorised workshop. To close the bonnet, push down from the centre until about 30 cm from the latch, then let it drop.
Updated on 14 October 2026 by ScegliAuto
Related tutorials
Dacia Duster
(2010-2017 /
MK 1, HS)
Today we will explain how to reset the service light on a 2015 Dacia Duster. The reset operations should only be performed after completing the servi…
Dacia Duster
(2024-2026 /
P1310)
In this video, we will see how to replace the cabin air filter on a Dacia Duster MK3: the filter is located at the top of the passenger footwell (for…
Dacia Duster
(2010-2017 /
MK 1, HS)
How to perform maintenance on a Dacia Duster? Open the driver's side door and pull the lever located at the bottom left of the dashboard, then slight…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.056
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |