Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine Oil on a Datsun Go

Model: Datsun Go MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Engine oil

Video tutorial

Want to change the engine oil and oil filter on this car model? The description below provides all the steps and instructions to follow for the replacement, and you can also refer to the video. Open the hood and lift the vehicle, then locate the drain plug under the oil pan. Unscrew the plug after placing a container on the floor to catch the oil. Next, locate the oil filter and proceed to unscrew it with the appropriate wrench.

Take the new filter and screw it back on after replacing the gasket. From the top of the engine compartment, proceed to fill the system with the new lubricant.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

Change the Engine Oil and Oil Filter on a Datsun Go
Change the Engine Oil and Oil Filter on a Datsun Go
Datsun Go (2013-2022 / MK 1) This short and simple video will show you the steps to perform the routine maintenance service by changing the engine oil and oil filter on the Datsu…
How to Replace the Engine Oil and Oil Filter of the Datsun Go
How to Replace the Engine Oil and Oil Filter of the Datsun Go
Datsun Go (2013-2022 / MK 1) Let's look at the procedure necessary for replacing the engine oil and oil filter while performing the routine maintenance service on the Datsun Go. …
How to replace the engine oil and filter on a Datsun Go
How to replace the engine oil and filter on a Datsun Go
Datsun Go (2013-2022 / MK 1) If you want to replace the engine oil and filter on this vehicle, the following description provides instructions on how to proceed and the various s…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos