Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Dodge Sprinter?

Model: Dodge Dodge Various
Part: Fuse box

The fuses of the Dodge Sprinter are contained inside the appropriate fuse boxes that are present on the vehicle: in this type of vehicle it is possible to find two boxes for containing the fuses. The first one is located in the dashboard immediately below the steering column: here it will be possible to find the fuses that regulate the operation of the horn, low beam headlights, fog lights, etc. The second box is instead located in the lower part compared to the driver's seat: it contains the fuses for the interior lights, cigarette lighter, etc.

Posted on 7 September 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

Where are the Fuses in a Dodge Sprinter?
Where are the Fuses in a Dodge Sprinter?
Dodge Dodge Various In the Dodge Sprinter, all the fuses are located inside the cabin. There are no fuse boxes in the engine compartment or elsewhere. The fuse boxes for…
Location and fuse box diagram of the Dodge Sprinter
Location and fuse box diagram of the Dodge Sprinter
Dodge Dodge Various In this video, we will look at the arrangement of the fuse boxes in the Dodge Sprinter and their diagram. The box located in the cabin is on the left…
Where is the starter motor fuse located in the Dodge Sprinter van?
Where is the starter motor fuse located in the Dodge Sprinter van?
Dodge Dodge Various If the starter motor of the Dodge Sprinter van suddenly stops working, the first thing to do is check the status of the respective fuse, the location…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos