Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restore the service light on a Dodge Durango MK3

Model: Dodge Durango MK 3, WK2 - Years 2011-2024
Part: Service warning light

We can see in this video how to reset the oil light on a Dodge Durango MK3, in this case from 2015. As always in these cases, we must make sure all doors are closed, then turn on the instrument panel, first by putting the key in position 1, then in position 2 to turn on the service light; and without pressing the brake pedal, slowly press the accelerator pedal three times. At this point, we will hear a small audible signal, a sort of "ding" that signals us that the reset has occurred. We then turn off the panel and upon restarting, we can see that the light has turned off.

Posted on 27 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to restore the Uconnect of the Dodge Durango
How to restore the Uconnect of the Dodge Durango
Dodge Durango (2011-2024 / MK 3, WK2) In the following article, we will show you how to restore the UConnect system of your Dodge Durango. This procedure is useful when the system has pro…
How to reset the engine oil light on the Dodge Durango
How to reset the engine oil light on the Dodge Durango
Dodge Durango (2011-2024 / MK 3, WK2) Today's information will show us the process of resetting the service maintenance light for the regular oil change of the Dodge Durango's engine. Fir…
How to Reset the Oil Warning Light on the Dodge Durango
How to Reset the Oil Warning Light on the Dodge Durango
Dodge Durango (2011-2024 / MK 3, WK2) To manually reset the engine oil warning light on your Dodge Durango Mk3, a very simple and quick procedure is required, which we will describe below…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos