Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Warning Light on the Dodge Durango

Model: Dodge Durango MK 3, WK2 - Years 2011-2024
Part: Service warning light

To manually reset the engine oil warning light on your Dodge Durango Mk3, a very simple and quick procedure is required, which we will describe below. First, get inside the car and ensure it is turned off and the doors are properly closed. Then, press the "Engine Start/Stop" button twice in quick succession and fully press the accelerator pedal three times in a row. At this point, the oil warning light reset is successfully completed, and you can choose to turn off the ignition or start the engine and drive away.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the Dodge Durango
Dodge Durango (2011-2024 / MK 3, WK2) If you own a Dodge Durango and want to learn how to manually reset the engine oil light, all you have to do is read the following procedure and then …
How to reset the engine oil light on the Dodge Durango
How to reset the engine oil light on the Dodge Durango
Dodge Durango (2011-2024 / MK 3, WK2) Today's information will show us the process of resetting the service maintenance light for the regular oil change of the Dodge Durango's engine. Fir…
Where is the fuse box located in the cabin of the 2003 Dodge Durango?
Dodge Durango (1998-2003 / MK 1, DN) To find the fuse box of the interior of your 2003 Dodge Durango, you must first carefully read the following guide and then follow all the various st…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos