Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the fuel pump on Dodge Journey

Model: Dodge Journey MK 1 - Years 2008-2020
Part: Fuel pump

We do not know how to disassemble the tank of the car to remove the pump? Let's see how the fuel pump is disassembled and replaced. We lift the car with a column bridge, remove the tank cover panel (if any), unscrew all the tightening screws around the tank. We detach the tank from under the car. When the tank is removed, we disconnect the electrical operating terminals of the pump. We disassemble the damaged pump from inside the tank. We assemble the new piece and proceed in reverse the tank disassembly operations. At the end of assembly, we test the operation of the fuel pump.

Posted on 4 February 2021 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fuel Pump from a Dodge Journey
How to Remove the Fuel Pump from a Dodge Journey
Dodge Journey (2008-2020 / MK 1) How to remove the fuel pump from a Dodge Journey (Freemont)? First, disconnect the battery cables, then, remove the tank from the underside of the ca…
How to remove the injectors from the Dodge Journey V6.
How to remove the injectors from the Dodge Journey V6.
Dodge Journey (2008-2020 / MK 1) Today's guide will show us how to disassemble and replace the fuel injectors of the Dodge Journey V6, as well as the Fiat Freemont. First, we open th…
How to Remove the Air Vents on Dodge Journey
How to Remove the Air Vents on Dodge Journey
Dodge Journey (2008-2020 / MK 1) Remove the air vents (side dashboard) on a Dodge Journey. Use multiple levers to remove the vents: lever at the top and bottom with the levers (as sh…

Other guides you may be interested in

How to Replace the Rear Indicator Bulb on an Audi A3

Position the car on a ramp or flat surface and immobilise it. Now, open the boot lid and, inside, corresponding to the rear light where you want to replace the indicator bulb, remove the small plastic cover using a screwdriver. Inside the hole, you will find a bolt (to be removed with a flat screwdriver); once this is undone, you can remove the entire rear light assembly. After this, proceed to remove the part inside the light assembly by unscrewing the 2 small bolts, as shown in the images. In the part you just removed, all the bulbs of the light are mounted. To replace them, simply remove them from their sockets and fit the new ones. To reassemble the entire unit, repeat all the steps shown in the images in reverse order.

Watch the video!


by ScegliAuto

More videos