Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing Spark Plugs

Model: Dodge Durango MK 2, ND - Years: 2004, 2005, 2006, 2007, 2008, 2009
Part: Spark plugs

See other generations:
Video tutorial

This V8 engine, with a capacity of 5,700 cubic centimetres and incredible performance (349 bhp), has a unique feature: it is equipped with two spark plugs for each cylinder. First, disconnect the connector from the ignition coil; each cylinder has a double lead connector.

Remove the leads, then blow into the spark plug holes to remove any debris that may fall into the cylinder once the spark plugs are removed. Unscrew the old spark plugs and install the new ones without exceeding the tightening torque.

It is recommended to clean the leads with contact spray before reapplying them.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Dodge Durango
How to Replace the Spark Plugs on a Dodge Durango
Dodge Durango (2011-2024 / WK2, MK 3) To replace the spark plugs on a Dodge Durango, open the bonnet to access the components inside the engine bay. The plastic cover on top of the engine…
How to Replace the Front Headlight Bulb of the Dodge Durango
How to Replace the Front Headlight Bulb of the Dodge Durango
Dodge Durango (2011-2024 / WK2, MK 3) Today's instructions will guide you through removing and replacing the front headlight bulb of the Dodge Durango. First, open the bonnet of the vehic…
How to Replace the Key Battery in the Dodge Durango 2
How to Replace the Key Battery in the Dodge Durango 2
Dodge Durango (2011-2024 / WK2, MK 3) In this mini guide for all Dodge Durango Mk2 (2011-2023) owners, you will be guided step by step on how to correctly replace the button battery locat…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos