Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Car Coil

Model: Dodge Caliber MK 1 - Years 2006-2012
Part: Ignition coil

The coil is one of the essential components of your car as it raises the voltage from 12 volts of the battery to the thousands of volts required by the spark plug to create a spark. Due to continuous stress, it can wear out and cause the car to stutter. To remove the old coil for replacement, lift the bonnet and open the plastic grille by acting on the two side clips with a screwdriver. You will then need to disconnect the ignition control unit connector and unscrew the two retaining bolts with a ratchet spanner, lifting the coil pack upwards. You can then fit the new coil, ensuring to position the high-voltage connectors correctly.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Ignition Coil for Third Cylinder
Replacement of Ignition Coil for Third Cylinder
Dodge Caliber (2006-2012 / MK 1) If the engine runs unevenly after starting and the engine warning light is illuminated, there is likely an ignition issue in one of the cylinders, me…
Replacement of the Car Suspension Arm
Replacement of the Car Suspension Arm
Dodge Caliber (2006-2012 / MK 1) The suspension arms of the car ensure the connection between the chassis and the struts. If they wear out, they need to be replaced because a faulty …
Head Gasket Problem
Head Gasket Problem
Dodge Caliber (2006-2012 / MK 1) If the engine runs unevenly as if, in colloquial terms, it is missing a few beats, then a problem with the spark plugs or ignition coils can be suspe…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos