Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the spare wheel of the Dodge Durango

Model: Dodge Durango MK 3, WK2 - Years 2011-2024
Part: Wheel

In order to reach and remove the spare wheel inside your Dodge Durango Mk2 you need to follow a few steps. Let's find out what they are. First, turn off the vehicle completely and be sure to park it on a level surface for safety reasons. Then go to the rear and raise the hood completely. Remove the protective panel and reach the compartment containing the maintenance kit after removing the cover. At this point, mount the key and unscrew the safety bolt by turning it anti-clockwise. At the end, you will have your spare wheel finally free and ready to be used.

Posted on 8 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil and oil filter in a Dodge Durango.
How to replace the engine oil and oil filter in a Dodge Durango.
Dodge Durango (2011-2024 / MK 3, WK2) In this video tutorial we see how to replace the engine oil and oil filter in a Dodge Durango. The first thing to do is to get in the car, turn off t…
Procedure for replacing the cabin air filter in a Dodge Durango
Procedure for replacing the cabin air filter in a Dodge Durango
Dodge Durango (2011-2024 / MK 3, WK2) In order to replace the cabin air filter in a Dodge Durango, we must first purchase the cabin filter from an authorized dealer. Next step, we have to…
How to replace the air filter in a Dodge Durango.
How to replace the air filter in a Dodge Durango.
Dodge Durango (2011-2024 / MK 3, WK2) In order to replace the air filter in a Dodge Durango, the first thing we need to do is to purchase a new air filter from an authorized dealer. The n…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos