Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Multipla
  6. : Engine head

Fiat Multipla - Engine head

Fiat Multipla (1998-2010 / MK 1)
How to disassemble the cylinder head

The very schematic video is actually a sequence of detailed photos that illustrates the correct sequence of operations for the disassembly of the cylinder head …read all…
Posted on 22 June 2023 by ScegliAuto

Airbags (1) Alternator (3) Battery (1) Gearbox (1) Key (1) Timing belt (1) V-belt (1) Air conditioning controls (1) -board computer (1) Checks and maintenance (4) Headlight (1) Fog lights (2) Cabin air filter (4) Clutch (1) Injectors (3) Headlight bulb (2) Rear light bulb (2) Interior lights ceiling light bulb (2) Dashboard light (1) Handle (3) Engine (1) Engine oil (2) Door panel (2) Brake pads (1) Hydraulic pistons (1) Fuel pump (1) Instrument cluster (1) Wheel (1) Fuse box (3) Seat (5) Engine head (1) EGR valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos