Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Multipla
    4. : Injectors

Fiat Multipla - Injectors

Fiat Multipla (1998-2010 / MK 1)
How to remove the methane injectors on Fiat Multipla
With the 19 wrench unscrew the bolt between the flute and the injector. As shown in the video, you just need to press the two clips that act as a hook to free …read all…
Posted on 3 February 2024 by ScegliAuto
Fiat Multipla (1998-2010 / MK 1)
How to disassemble and clean the Fiat Multipla methane injectors
Let's see in this video how to remove and clean the methane gas injectors on the Fiat Multipla. We open the engine compartment, lift the front hood, put it in …read all…
Posted on 25 October 2023 by ScegliAuto
Fiat Multipla (1998-2010 / MK 1)
Replacing the methane injectors
The injector is an important element and is composed of a nozzle, a valve and a pump which has the task of imparting the right pressure to the fuel. To proceed …read all…
Posted on 24 July 2023 by ScegliAuto
Airbags (1) Alternator (3) Battery (1) Gearbox (1) Key (1) Timing belt (1) V-belt (1) Air conditioning controls (1) -board computer (1) Checks and maintenance (4) Headlight (1) Fog lights (2) Cabin air filter (4) Clutch (1) Injectors (3) Headlight bulb (2) Rear light bulb (2) Interior lights ceiling light bulb (2) Dashboard light (1) Handle (3) Engine (1) Engine oil (2) Door panel (2) Brake pads (1) Hydraulic pistons (1) Fuel pump (1) Instrument cluster (1) Wheel (1) Fuse box (3) Seat (5) Engine head (1) EGR valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos