Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Multipla
    4. : Rear light bulb

Fiat Multipla - Rear light bulb

Fiat Multipla (1998-2010 / MK 1)
Replacing the rear light bulb on the Fiat Multipla
Let's find out today the procedure that will allow us to disassemble and replace the rear light bulb of the Fiat Multipla. First of all, we open the tailgate …read all…
Posted on 3 May 2023 by ScegliAuto
Fiat Multipla (1998-2010 / MK 1)
How to replace the rear light indicator bulb on a Fiat Multipla
Before we can start, we will have to go and open the tailgate of our Fiat Multipla. So let's start by disengaging and removing the covers of the screws and …read all…
Posted on 31 January 2024 by ScegliAuto
Airbags (1) Alternator (3) Battery (1) Gearbox (1) Key (1) Timing belt (1) V-belt (1) Air conditioning controls (1) -board computer (1) Checks and maintenance (4) Headlight (1) Fog lights (2) Cabin air filter (4) Clutch (1) Injectors (3) Headlight bulb (2) Rear light bulb (2) Interior lights ceiling light bulb (2) Dashboard light (1) Handle (3) Engine (1) Engine oil (2) Door panel (2) Brake pads (1) Hydraulic pistons (1) Fuel pump (1) Instrument cluster (1) Wheel (1) Fuse box (3) Seat (5) Engine head (1) EGR valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos