Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Multipla
  6. : Fuel pump

Fiat Multipla - Fuel pump

Fiat Multipla (1998-2010 / MK 1)
How to replace the fuel pump of the Fiat Multipla

To reach the fuel pump for your car it will be necessary to "dig", that is, it will be necessary to lift the seat cushions of the rear passengers, consequently …read all…
Posted on 26 September 2023 by ScegliAuto

Airbags (1) Alternator (3) Battery (1) Gearbox (1) Key (1) Timing belt (1) V-belt (1) Air conditioning controls (1) -board computer (1) Checks and maintenance (4) Headlight (1) Fog lights (2) Cabin air filter (4) Clutch (1) Injectors (3) Headlight bulb (2) Rear light bulb (2) Interior lights ceiling light bulb (2) Dashboard light (1) Handle (3) Engine (1) Engine oil (2) Door panel (2) Brake pads (1) Hydraulic pistons (1) Fuel pump (1) Instrument cluster (1) Wheel (1) Fuse box (3) Seat (5) Engine head (1) EGR valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos