Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Multipla
    4. : Handle

Fiat Multipla - Handle

Fiat Multipla (1998-2010 / MK 1)
How do you replace the inside handle of the Fiat Multipla?
To be able to replace the internal handle of the Fiat Multipla, it is necessary to unhook the two rivets that secure the panel on which the handle is located. …read all…
Posted on 13 March 2024 by ScegliAuto
Fiat Multipla (1998-2010 / MK 1)
Fiat Multipla external door handle removal instructions
In this video tutorial we will see the main instructions on how to remove the door handle of a Fiat Multipla. First of all we open the door and we go to …read all…
Posted on 6 March 2024 by ScegliAuto
Fiat Multipla (1998-2010 / MK 1)
How to replace the external handle of the Fiat Multipla
Open the door in question and remove the caps on the inner armrest part of the door, then remove the bolts inside as well. Now also remove the two bolts that …read all…
Posted on 24 September 2023 by ScegliAuto
Airbags (1) Alternator (3) Battery (1) Gearbox (1) Key (1) Timing belt (1) V-belt (1) Air conditioning controls (1) -board computer (1) Checks and maintenance (4) Headlight (1) Fog lights (2) Cabin air filter (4) Clutch (1) Injectors (3) Headlight bulb (2) Rear light bulb (2) Interior lights ceiling light bulb (2) Dashboard light (1) Handle (3) Engine (1) Engine oil (2) Door panel (2) Brake pads (1) Hydraulic pistons (1) Fuel pump (1) Instrument cluster (1) Wheel (1) Fuse box (3) Seat (5) Engine head (1) EGR valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos