Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Multipla
    4. : Checks and maintenance

Fiat Multipla - Checks and maintenance

Fiat Multipla (1998-2010 / MK 1)
How do you reset the Fiat Multipla Service warning light?
To reset the Fiat Multipla Service warning light, turn on the instrument panel and press the button under the rev counter, in correspondence with the wording …read all…
Posted on 28 February 2024 by ScegliAuto
Fiat Multipla (1998-2010 / MK 1)
How to reset the "Service" warning light on a Fiat Multipla
Before we can start, we will have to go and sit on the driver's seat of our Fiat Multipla, and then activate the instrument panel. So let's start by pressing …read all…
Posted on 8 January 2024 by ScegliAuto
Fiat Multipla (1998-2010 / MK 1)
How to connect the computer to the socket on Fiat Multipla
Do you want to do maintenance on a Fiat Multipla and don't know how to do it? Let's see in this video how to connect the mini computer to reset the warning …read all…
Posted on 25 October 2023 by ScegliAuto
Fiat Multipla (1998-2010 / MK 1)
Complete engine and gearbox maintenance with additives
The purpose of the video is to demonstrate how the use of some additives can improve engine performance and preserve its characteristics over time. In fact, …read all…
Posted on 19 July 2023 by ScegliAuto
Airbags (1) Alternator (3) Battery (1) Gearbox (1) Key (1) Timing belt (1) V-belt (1) Air conditioning controls (1) -board computer (1) Checks and maintenance (4) Headlight (1) Fog lights (2) Cabin air filter (4) Clutch (1) Injectors (3) Headlight bulb (2) Rear light bulb (2) Interior lights ceiling light bulb (2) Dashboard light (1) Handle (3) Engine (1) Engine oil (2) Door panel (2) Brake pads (1) Hydraulic pistons (1) Fuel pump (1) Instrument cluster (1) Wheel (1) Fuse box (3) Seat (5) Engine head (1) EGR valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos