Do it yourself
Frequently asked questions about cars and motorcycles

Complete Engine and Gearbox Maintenance with Additives.

Model: Fiat Multipla MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

Video tutorial

The purpose of this video is to demonstrate how the use of certain additives can improve engine performance and preserve its characteristics over time. Before performing maintenance, a bench test is conducted to measure engine performance.

The treatment begins with the addition of a cleaning additive to the engine; then, complete maintenance is carried out by replacing the engine oil, the corresponding filter, and the gearbox oil; both the new gearbox oil and the engine oil receive an anti-friction additive.

Maintenance is completed with the replacement of the air filter and fuel filter, adding an additive to the fuel system as well.

After maintenance, the bench test is repeated, highlighting improvements.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Fiat Multipla (1998-2010 / MK 1) In this video, we will show you how to change the engine oil and oil filter while also performing the routine service on a second-generation Fiat Mul…
Fiat Multipla (1998-2010 / MK 1) Changing the engine oil filter along with the oil on a Fiat Multipla. Follow this guide to proceed with the replacement: open the car door and pull u…
Fiat Multipla (1998-2010 / MK 1) To replace the gear selector cables on a Fiat Multipla, lift the cover of the gear lever to remove it completely: this will give you access to the up…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos