Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the car radio in the Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Car stereo

The video presented here serves as a real guide to replacing the stock car radio with an aftermarket one, specifying that the car on which the work was done is a Fiat 500x, but the procedure is identical to that of the Fiat 500. The first thing to remove is the dashboard trim and then the radio itself with a plastic lever, then remove the locking screws of the radio and finally extract it from its housing, being careful to disconnect the rear connector of the power cables, as well as the antenna cable.

Posted on 9 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Radio in a Fiat 500
Fiat 500 (2007-2021 / 312) Want to remove the old car radio installed in the dashboard of a Fiat 500? Let's look at how to remove the old car radio. Remove the operation button…
How to Remove the Radio from a Fiat 500?
How to Remove the Radio from a Fiat 500?
Fiat 500 (2012-2023 / 500 L) The radio in a Fiat 500 can be removed using special extraction tools. These tools are specifically designed to remove radios from their installation…
How to Remove the Car Radio from the Fiat 500
How to Remove the Car Radio from the Fiat 500
Fiat 500 (2007-2021 / 312) To remove the car radio from the Fiat 500, use a flat screwdriver to gently lift the internal buttons of the radio located on both the right and left…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - Why does the radio volume control on the Fiat 500 not work? Read answer
    • 500 2007-2022 - What to do if the radio of the Fiat 500 does not work? Read answer
    • 500 2012-2023 - How to unlock Fiat 500 car stereo? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos