Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light in the Fiat Ducato?

Model: Fiat Ducato X290 - Years 2014-2026
Part: Service warning light

Performing maintenance on your vehicle, if desired, is a rather simple and quick operation, meaning the change of motor oil and air and oil filters exactly as shown in this video guide, very well made and complete with verbal commentary. However, it is necessary afterwards to proceed with the cancellation of the Service light on the instrument panel, bright and shaped like a wrench. To do this, we simply need to hold down the accelerator pedal, simultaneously turn on the aforementioned panel, and press the brake pedal seven times. Reset completed.

Posted on 17 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service light on a Fiat Ducato
Resetting the service light on a Fiat Ducato
Fiat Ducato (1981-1993 / MK 1) Hello! Today we will explain how to reset the service light on a Fiat Ducato. It is important to remember that this step should only be done after pe…
How do you reset the Service light on the Fiat Ducato?
Fiat Ducato (2014-2026 / X290) To reset the Service light of the Fiat Ducato, you need to connect a diagnostic tool to the OBD port of the vehicle: this port will be located on the…
How do you reset the Service light on the Fiat Ducato 250?
How do you reset the Service light on the Fiat Ducato 250?
Fiat Ducato (2006-2014 / X250) The simple way to reset the Service light in the Fiat Ducato 250 is as follows: turn on the instrument panel, press the accelerator pedal, simultaneo…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 2014-2026 - How to reset the service warning light on Fiat Ducato? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos