Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt of the Fiat Ducato?

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Timing belt

See other generations:
Video tutorial

To replace the timing belt of the Fiat Ducato, lift the vehicle so that you can completely remove the front right wheel. Once the wheel is removed, detach the inner wheel arch lining to gain access to the belt on the side of the engine block.

Here, you can completely remove the tensioner to reduce tension and replace it with a new spare part. After replacement, reinsert all removed parts and check their operation.


Updated on 25 October 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on the Fiat Ducato 2.5 D
Guide to Replacing the Timing Belt on the Fiat Ducato 2.5 D
Fiat Ducato (1981-1993 / MK 1) The instructions in this guide will allow you to remove and replace the timing belt on the Fiat Ducato 2.5 D. First, open the engine cover of the veh…
How to Replace the Timing Belt on a Fiat Ducato 2.3
How to Replace the Timing Belt on a Fiat Ducato 2.3
Fiat Ducato (2006-2014 / X250) In this very short video tutorial, learn how to replace the timing belt on a Fiat Ducato produced from 2006 to 2014. This operation is complicated an…
How to Replace the Timing Belt on a Fiat Ducato 2.8 JTD
How to Replace the Timing Belt on a Fiat Ducato 2.8 JTD
Fiat Ducato (2006-2014 / X250) The presented video helps when you need to replace the timing belt on the Fiat Ducato. Specifically, the work shown does not only demonstrate how to …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos