Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Fiat Ducato 2.8 JTD

Model: Fiat Ducato X250 - Years 2006-2014
Part: Timing belt

The presented video helps when you need to replace the timing belt on the Fiat Ducato. Specifically, the work shown does not only demonstrate how to replace the timing belt, but also the auxiliary belt, the bearing, and the tensioner. Start with the latter by raising the vehicle and removing the protective cover of the tensioner and the right wheel arch liner. After removing the auxiliary belt and its bearing, move on to the timing belt, following all the instructions provided in the video step by step.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on a Fiat Ducato 2.8 JTD?
How to Replace the Timing Belt on a Fiat Ducato 2.8 JTD?
Fiat Ducato (2002-2006 / ) To replace the timing belt on a Fiat Ducato 2.8 JTD, lift the vehicle to remove the front right wheel and its wheel arch. This will provide access to…
Guide to Replacing the Timing Belt of the Fiat Ducato 2.3 JTD
Guide to Replacing the Timing Belt of the Fiat Ducato 2.3 JTD
Fiat Ducato (2006-2014 / X250) The instructions in this guide will show us how to disassemble and replace the timing belt of the Fiat Ducato 2.3 JTD. First, let's open the vehicle'…
Replacement of the timing belt for the Fiat Ducato 2.8 JTD.
Replacement of the timing belt for the Fiat Ducato 2.8 JTD.
Fiat Ducato (1993-2016 / MK 2) Below, we will see the instructions for disassembling and replacing the timing belt on the Fiat Ducato 2.8 JTD. First, let's open the vehicle's hood …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos