Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the timing belt for the Fiat Ducato 2.8 JTD.

Model: Fiat Ducato MK 2 - Years 1993-2016
Part: Timing belt

Below, we will see the instructions for disassembling and replacing the timing belt on the Fiat Ducato 2.8 JTD. First, let's open the vehicle's hood and start by removing the engine mount on the timing belt side, then disconnect the V-belt. Next, we lift the vehicle to remove the crankshaft pulley and the timing cover, thus gaining access to the belt, as shown in the video. At this point, we remove and replace the timing belt, installing the new original one; we then perform the correct timing of the engine and reassemble all the components.

Posted on 25 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt of the Fiat Ducato 2.3 JTD
Guide to Replacing the Timing Belt of the Fiat Ducato 2.3 JTD
Fiat Ducato (2006-2014 / X250) The instructions in this guide will show us how to disassemble and replace the timing belt of the Fiat Ducato 2.3 JTD. First, let's open the vehicle'…
How do you replace the timing belt of the Fiat Ducato 2.8 JTD?
How do you replace the timing belt of the Fiat Ducato 2.8 JTD?
Fiat Ducato (2006-2014 / X250) The procedure for replacing the timing belt on the Fiat Ducato 2.8 JTD involves opening the hood to access the engine compartment and removing the co…
Guide to replacing the timing belt of the Fiat Ducato 2.8 JTD
Guide to replacing the timing belt of the Fiat Ducato 2.8 JTD
Fiat Ducato (1993-2016 / MK 2) Today's main steps will allow us to disassemble and replace the timing belt of the Fiat Ducato 2.8 JTD. First, we lift the vehicle and start disconne…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos