Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Air Conditioning Knobs on a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Dashboard

Follow how to remove the manual air conditioning knobs on a Fiat 500 and how to change the bulbs. In this video, learn the procedure. Remove the air vent knob panel using a plastic lever (first, turn all the knobs to the maximum position) and pry around the switch panel. After disconnecting the air conditioning control panel, extract the damaged bulbs from the dashboard. Install the new bulbs and prepare to reassemble the knob panel. Be careful not to break the plastic tabs that secure the panel. Finally, test the installed bulbs by turning on the instrument cluster and controls.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Bulbs of the Air Conditioning Control Knobs in a Fiat 500
How to Replace the Bulbs of the Air Conditioning Control Knobs in a Fiat 500
Fiat 500 (2007-2024 / 312) How to replace the illumination bulbs of the air conditioning control knobs in a new model Fiat 500? Follow this video to proceed: remove the control…
How to Replace the Knob Bulbs on a Fiat 500
How to Replace the Knob Bulbs on a Fiat 500
Fiat 500 (2007-2024 / 312) How do we change the bulbs for the manual air conditioning knobs on a Fiat 500? Let's see how to proceed. Remove the ventilation knob panel using a p…
How to Remove the Air Conditioning Knobs on a Fiat 500
How to Remove the Air Conditioning Knobs on a Fiat 500
Fiat 500 (2007-2024 / 312) How to remove the manual air conditioning knobs on a Fiat 500 to replace the illumination bulbs? Follow this video to proceed. Remove the control pan…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - How much does it cost to replace the dashboard dashboard of the FIAT 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos