Do it yourself
Frequently asked questions about cars and motorcycles

How do you turn on the lights of the Fiat 500L?

Model: Fiat 500 500 L - Years 2012-2023
Part: Headlight

How do you turn on the lights on the Fiat 500L? Let's see it in this short video. In particular, the car in the video is a 2014 model: the multifunction lever for the lights is located to the left of the steering column, and controls most of the vehicle's lights. The parking lights are activated with the ignition off, by rotating the end of the lever upwards, to the first position. With the ignition on, the driving lights are activated by rotating the end of the lever to position "0", while the low beams are activated by rotating the lever to the next position. The high beams are activated by pulling the lever towards you, and turned off by pushing it towards the dashboard. The "flash-to-pass" function is activated by two quick pulls towards you. The "followMe" function is activated when the car is turned off, but the headlights remain on for the next 30 seconds, lighting up the road for us: we can set it up to a maximum of 210 seconds. The fog light control is located on the center console to the right of the hazard light control; but the fog lights only turn on with the low beams on.

Posted on 2 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2012-2023 / 500 L) In this video, you will learn how to replace the burnt-out bulb of the DRL, or daytime running lights, on Fiat's MPV, the 500L. Start the replacement…
Fiat 500 (2012-2023 / 500 L) In today's video, we can see how to change the daytime running light bulb of a Fiat 500L. So, to change the daytime running light bulb, we first need…
Fiat 500 (2012-2023 / 500 L) Replacing the bulbs on the Fiat 500L is very simple; open the bonnet and look inside, remove the cap of the dipped beam. The bulb inside is a push-fi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos