Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Engine Mount of a Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Engine mount

In this video, we will see how to remove the engine mount of a Fiat Grande Punto. Pull the lever to open the engine compartment and lift the bonnet, securing it. Use a socket wrench to unscrew the metal bar located on the left side of the engine. Next, remove the previously unscrewed pins, and use the socket wrench to unscrew the remaining fastening pins around the engine mount plate, pulling them out from the cylinder head. Finally, extract the piece from the engine compartment and replace it with the new one, tightening the pins around the mount. Once assembled, close the bonnet.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing the Clutch from the Fiat Grande Punto 1.2
Guide to Removing the Clutch from the Fiat Grande Punto 1.2
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This brief guide outlines the main steps to remove and replace the clutch of the Fiat Grande Punto 1.2, as well as the Punto Evo. First, open the bon…
Replacing the engine mount on the Fiat Grande Punto 1.4
Replacing the engine mount on the Fiat Grande Punto 1.4
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide will show you how to remove and replace the engine mount on the Fiat Grande Punto 1.4, following the instructions below. First, open the b…
Removing the Gearbox Engine Mount on a Fiat Punto Evo 1.4 8V
Removing the Gearbox Engine Mount on a Fiat Punto Evo 1.4 8V
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, you will see how to remove the engine mount of the gearbox on a Fiat Punto Evo and Grande Punto, with a 1.4 8-valve petrol engine. Fir…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos