Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Glow Plugs from Your Fiat Stilo

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Glow plugs

Do you want to remove the glow plugs from your Fiat Stilo and don't know how? Let's see how to proceed with the disassembly. Pull the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, securing it in place. Remove the plastic soundproofing panel covering the cylinder head. Use a socket wrench with an extension to unscrew the glow plug to be replaced from the cylinder head. Take the new glow plug and insert it into the cylinder head using the socket wrench. Finally, refit the plastic cylinder head cover panel.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Glow Plugs on a Fiat Stilo
How to Replace the Glow Plugs on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) If the glow plug warning light flashes on the instrument panel during starting, you can perform a diagnosis and check the fault memory in the engine …
How to Replace the Spark Plugs on a Fiat Stilo?
How to Replace the Spark Plugs on a Fiat Stilo?
Fiat Stilo (2001-2010 / MK 1) To replace the spark plugs on a Fiat Stilo, open the bonnet to access the screws securing the plastic cover on top of the engine block. Once these sc…
Removing the Rear Seats on a Fiat Stilo
Removing the Rear Seats on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Remove the rear seats fitted in a Fiat Stilo. First, take off the metal guides at both ends of the backrest (mounted on the car's body), using plasti…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos