Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper from a Fiat Fiorino

Model: Fiat Fiorino MK 3 - Years 2007-2026
Part: Rear bumper

How to remove the rear bumper from a Fiat Fiorino. Follow these steps carefully. This operation is not too complex if done in an orderly manner. First, use a screwdriver or battery-powered drill to unscrew the fastening screws located at the rear lights, then remove them from the bodywork along with the attached clips. Unscrew the screws located at the top of the bumper, then remove the screws located at the sides of the wheel arch liners. Once the bumper is free from any screws or pins, grasp it with your hands and pull it away from the bodywork (disconnect any power cables if present).

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Fiat Fiorino?
How do you reset the Service light on the Fiat Fiorino?
Fiat Fiorino (2007-2026 / MK 3) In order to reset the Service light of the Fiat Fiorino, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found…
Replacing the diesel filter on the Fiat Fiorino 1.3 Multijet
Replacing the diesel filter on the Fiat Fiorino 1.3 Multijet
Fiat Fiorino (2007-2026 / MK 3) Let's see in this guide the main steps that will allow us to remove and replace the diesel filter of the Fiat Fiorino, with 1.3 MultiJet engine. Firs…
Where are the fuses of the Fiat Fiorino located?
Where are the fuses of the Fiat Fiorino located?
Fiat Fiorino (2007-2026 / MK 3) Inside the Fiat Fiorino all the fuses are positioned in one of the fuse boxes that have been installed on the vehicle: in this type of vehicle it is …

Other guides you may be interested in

How to Replace the Diesel Filter on a Dacia Duster

Let's see how to replace the diesel filter on a Dacia Duster. Start by removing the plastic cover at the bottom of the bumper with a suitable screwdriver (remove the circle), then reach the front headlamp located in the bumper (as shown in the video). After removing the container, take out the filter inside and fit a new one (same size). Refit the container and the plastic cover under the car's bumper with the attached clips. Test the proper functioning. Refit the front circle with the securing clips and lower the car.

Watch the video!


by ScegliAuto

More videos