Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear fog light bulb of the Fiat 500.

Model: Fiat 500 312 - Years 2007-2024
Part: Fog lights

Let's briefly see the instructions that will allow us to disassemble and replace the rear fog light bulb of the Fiat 500. To access the rear fog light, it will be necessary to access it from the rear wheel arch; for convenience, the rear wheel will be removed, as shown in the video. At this point, we remove the plastic cover to access the fog light bulb, disconnecting the electrical connector to remove and replace the light; we install it on the tail light and check its operation, reassembling the plastic cover of the wheel arch and finally the rear wheel.

Posted on 26 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb of the Fiat 500?
How to Replace the Rear Light Bulb of the Fiat 500?
Fiat 500 (2007-2022 / 312) To replace the rear light bulb of the Fiat 500, open the rear hatch of the car to access the screws securing the light unit: by loosening these screw…
How to Replace the Rear Light Bulb of the 2015 Fiat 500 L
How to Replace the Rear Light Bulb of the 2015 Fiat 500 L
Fiat 500 (2012-2023 / 500 L) Replacing the rear light bulb of the 2015 Fiat 500 L is a straightforward task that you can do independently. First, open the boot. Next, remove the …
How to remove the rear turn signal bulb of the Fiat 500 Abarth
How to remove the rear turn signal bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Below we will see the instructions that will allow us to disassemble and replace the turn signal bulb of the rear taillight of the Fiat 500 Abarth. F…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos