Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the engine air filter on Fiat 500X

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Air filter

See other generations:
Video tutorial

Pull the black plastic lever located inside the vehicle, to the left of the pedals. Release the front hood after lifting it slightly.

Keep it open with the rod provided on the left. Once the hood is lifted, you will find the air filter to the left of the engine.

Disconnect the electrical connector located above the large ventilation tube (disconnect the connector with a screwdriver). Unscrew the three screws holding the filter container with a crosshead screwdriver.

Unscrew the screw that locks the metal clamp around the tube and remove the Air Box cover from inside the engine compartment. Once the container is open, remove the old filter and vacuum any residue inside the Air Box to avoid engine problems.

Place the new filter inside the container, making sure the arrows are facing downward. Connect the ventilation tube, screwing the screw above the clamp.

Close the filter container with the cover and reconnect the electrical connector above the ventilation tube.


Posted on 28 December 2024 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Fiat 500X
Fiat 500 (2014-2022 / 500 X) In the following guide you will find the description of all the various steps that you need to follow to complete the replacement of the cabin air fi…
How to Remove the Engine Air Filter on a Fiat 500X
How to Remove the Engine Air Filter on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) To remove the engine air filter on a Fiat 500X: open the car door, pull up the lever to open the engine bay located at the bottom left of the dashboa…
How to Replace the Air Filter on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) How do you replace the engine air filter on a Fiat 500X? Follow these steps: open the car door, pull up the engine compartment release lever located …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos