Do it yourself
Frequently asked questions about cars and motorcycles

How to repair the heating system of the Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Air conditioner

See other generations:
Video tutorial

A common issue that occurs with the Fiat 500 is a malfunction in the air conditioning system, where the heating stops working at a certain point and only cold air comes out even when the temperature is set to 3°C. The YouTuber dismantled the entire dashboard and unfortunately, the only solution seemed to be replacing the entire air conditioning unit - which is quite expensive - because there are no spare parts available.

Upon inspection, it was found that the cause of the issue was a broken pin that is responsible for switching between hot and cold air, and is controlled by a motor.

The YouTuber ingeniously built a new pin to control this function and reinstalled it, allowing the motor to properly operate the switch between hot and cold air.


Posted on 8 January 2025 by ScegliAuto


Related tutorials

Fiat 500 (2007-2021 / 312) In this video tutorial, you will see the main instructions for removing the cabin heater radiator on a Fiat 500. First, get inside the car and remove…
Fiat 500 (2007-2024 / 312) During the cold season, there’s nothing better than sitting comfortably in your vehicle and turning on the heating before starting the engine. First,…
Fiat 500 (2012-2023 / 500 L) Before you can start, open the boot of your Fiat 500 and remove the boot carpet. This will give you access to the bolts securing the rear seat backre…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos