Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to mount the spare wheel on a Fiat Ducato by yourself

Model: Fiat Ducato X290 - Years 2014-2026
Part: Wheel

In this video, we see how to mount the spare wheel carrier on a Fiat Ducato: of course, we have to work from underneath the vehicle. In addition to a Fiat spare parts dealer, we can also find the part on E-Bay with the code 153671452573 at a price of 147.99 euros, with free delivery. Naturally, there are already pre-drilled holes on the bottom of the vehicle, so we need to align the holes with our carrier, and start putting in the bolts; then it's the turn of the bracket and then the wheel support bracket, which needs to be aligned with the carrier, in the center of which we will place the spare wheel. Make sure the cord is not twisted and try to lift the wheel, turning a ratchet screwdriver on the side bracket. When it is in contact with the bodywork, the wheel stops and our job is done.

Posted on 8 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spare Wheel on the Fiat Ducato
How to Replace the Spare Wheel on the Fiat Ducato
Fiat Ducato (2014-2026 / X290) In today's video tutorial, we will see the steps that will allow you to remove and replace the wheel with the spare on the Fiat Ducato, in Camper ver…
How to Remove and Install the Spare Wheel on the Fiat Ducato
How to Remove and Install the Spare Wheel on the Fiat Ducato
Fiat Ducato (2014-2026 / X290) Today, in this video tutorial, learn how to remove and replace the wheel with the spare on the Fiat Ducato camper by following these simple steps. Fi…
Where to Find and How to Remove the Spare Wheel on a Fiat Ducato
Where to Find and How to Remove the Spare Wheel on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) The spare wheel on your Fiat Ducato is located underneath the rear. Before you can start removing it, slightly lift the rear of the van. Begin by loo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos