Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on the Fiat Bravo 2

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Service warning light

In the following guide aimed at all of you who own a second-generation Fiat Bravo, we will explain step by step how you can correctly and safely complete the manual reset of the engine oil light. First, reach the driver's seat in the cabin, then turn on the instrument panel and hold down the accelerator pedal for about 15 seconds. Then press the brake pedal fully 8 times and at this point, keep both the brake pedal and the accelerator pedal pressed for 15 seconds to complete the manual reset of the oil light.

Posted on 7 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the filter and engine oil on the Fiat Bravo 2
How to replace the filter and engine oil on the Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) When the oil light comes on in a Fiat Bravo car, it is necessary to replace the oil and the oil filter. We open the front hood and the oil tank cap. …
Resetting the service light of the Fiat Bravo.
Resetting the service light of the Fiat Bravo.
Fiat Bravo (2007-2014 / Bravo 2) Let's find out how to reset the service light for the regular maintenance of the engine oil change on the Fiat Bravo. First, get into the car and tur…
Reset engine oil warning light Fiat Bravo, Punto, Panda
Reset engine oil warning light Fiat Bravo, Punto, Panda
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial we will see the instructions to be able to reset the engine oil light for routine maintenance of different Fiat models, such a…

Other guides you may be interested in

How to Remove the Instrument Cluster on a Citroen Xsara Picasso

How to remove the instrument cluster located in the centre of the dashboard on a Citroen Xsara Picasso? Follow these steps to disassemble the parts: use a lever to remove the plastic covers of the instrument cluster. Unscrew the securing screws located at the sides of the instrument cluster with a screwdriver; after removing the screws, pull the piece out from the dashboard and disconnect the power cable located at the back of the instrument cluster. Fit the new piece or (replace the LEDs/bulbs in the cluster) and reassemble the same. Finally, reverse the assembly steps.

Watch the video!


by ScegliAuto

More videos