Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Filter on the Fiat Bravo 2

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Engine oil

See other generations:
Video tutorial

When the oil warning light comes on in a Fiat Bravo, you need to replace the oil and the corresponding filter. Open the front bonnet and the oil filler cap. Raise the vehicle and remove the oil sump cover.

Use a 20mm Torx key and a Phillips screwdriver to remove the nuts and screws on the oil sump to drain the fluid. Close the oil sump once the reservoir is empty and refit the cover.

Lower the car and open the oil filter cap, replace the filter, and then top up the oil.


Updated on 23 October 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Filter on a Fiat Bravo
How to Change the Engine Oil and Filter on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) This video shows how to change the engine oil and the appropriate filter on a Fiat Bravo. Lift the car on a column lift or jack and unscrew the bolt …
How to Replace the Diesel Filter on a Fiat Bravo?
How to Replace the Diesel Filter on a Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) To replace the diesel filter on a Fiat Bravo, open the bonnet to access the components inside the engine bay. Here, on the left side next to the engi…
How to Replace the Air Filter on the Fiat Bravo
How to Replace the Air Filter on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Unlike many other car models on the market, the air filter on the Fiat Bravo is not located in the engine bay but underneath the vehicle. Therefore, …

Other guides you may be interested in

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos