Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil Filter in the Fiat Bravo 2

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Oil filter

See other generations:
Video tutorial

After opening the bonnet of the engine compartment and unscrewing the oil filler cap, remove the dipstick. Lift the FIAT Bravo using the ramp where it was previously positioned.

From under the car, unscrew the screws securing the plastic covers of the engine block with a suitable screwdriver and remove them. Now, position a container under the engine oil drain hole and, after unscrewing the appropriate bolt, allow all the oil to drain out. Locate the oil filter housing and unscrew it from its seat.

Replace the old filter and the gasket of the housing, then refit everything in its place. After re-tightening the drain bolt, reposition the plastic covers of the engine and lower the car back down.

At this point, pour the new oil into the engine oil reservoir. Check the oil level and you're done.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Remove the Engine Oil Filter on Fiat Bravo
How to Remove the Engine Oil Filter on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How do you remove the engine oil filter on a Fiat Bravo? Follow this guide to proceed with the replacement: open the car door and pull up the engine …
How to Replace the Engine Oil and Filter on the Fiat Bravo 2
How to Replace the Engine Oil and Filter on the Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) When the oil warning light comes on in a Fiat Bravo, you need to replace the oil and the corresponding filter. Open the front bonnet and the oil fill…
How to Replace the Side Indicator on a Fiat Bravo
How to Replace the Side Indicator on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Using a thin but sturdy plastic tool, lever the side indicator out of your Fiat Bravo. Once done, disconnect the outer cover of the indicator from th…

Other guides you may be interested in

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos