Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Engine Oil Filter on Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Oil filter

How do you remove the engine oil filter on a Fiat Bravo? Follow this guide to proceed with the replacement: open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet. Using a socket spanner, unscrew the large securing bolt of the container cap where the oil filter is located. Remove the air filter kit to access the filter and extract the worn oil filter, then position a new one. Lift the car on a jack and unscrew the bolt of the oil sump; allow the fluid to drain into a container.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Bravo (2007-2014 / Bravo 2) How to replace the damaged stereo in a Fiat Bravo? Here’s how to remove it. Use the original metal keys to remove the stereo from the Fiat Bravo. Ins…
Fiat Bravo (2007-2014 / Bravo 2) To disassemble the gear knob located inside the cabin of your Fiat Bravo correctly and safely, you must follow all the steps described in our new gui…
Fiat Bravo (2007-2014 / Bravo 2) How to remove the original radio from a Fiat Bravo? Let’s carefully see in this video how to carry out the disassembly following the guide. Use the o…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos