Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Filter on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Engine oil

See other generations:
Video tutorial

This video shows how to change the engine oil and the appropriate filter on a Fiat Bravo. Lift the car on a column lift or jack and unscrew the bolt under the oil sump with a socket wrench, allowing the oil to drain into a container for future disposal.

After letting all the oil drain out, screw the bolt back into the sump and move on to the oil filter. Locate the oil filter cover, unscrew the oil filter with a chain wrench, remove the old filter, and insert the new one. Ensure the filter is properly seated on the base.

Finally, top up the oil reservoir with new fluid following the manufacturer's recommendations.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Filter on the Fiat Bravo 2
How to Replace the Engine Oil and Filter on the Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) When the oil warning light comes on in a Fiat Bravo, you need to replace the oil and the corresponding filter. Open the front bonnet and the oil fill…
How to Remove the Engine Oil Filter on Fiat Bravo
How to Remove the Engine Oil Filter on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How do you remove the engine oil filter on a Fiat Bravo? Follow this guide to proceed with the replacement: open the car door and pull up the engine …
How to Replace the Oil Filter on Fiat Bravo
How to Replace the Oil Filter on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How to replace the oil filter on a Fiat Bravo? Follow this guide to proceed with the replacement: open the car door and pull up the engine compartmen…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos