|
Do it yourself
| |||
| ||||
Turning Off the Airbag Warning Light
Model: Fiat Punto
MK 2, 188
- Years:
1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Video tutorial
To turn off the airbag warning light on the instrument panel, you need a diagnostic tool (it doesn't have to be the official tool; an aftermarket diagnostic tool will suffice). The OBD (on-board diagnostics) port to connect the diagnostic tool is located just behind the glove compartment on the driver's left: use a large flat screwdriver (or a 5 pence coin) to turn the two screws securing the glove compartment 90° counter-clockwise and open it. Then connect to the OBD port (located under the fuse box) and use the diagnostic tool to select the make and model of the vehicle, choose the airbag system, and read the fault memory: if the fault is "intermittent", it can be cleared and the warning light on the instrument panel turned off. After clearing, exit the diagnostic section, switch off, and then switch on the ignition to check that the light does not come back on after the self-check.
Updated on 3 February 2026 by ScegliAuto
Related tutorials
Fiat Punto
(1993-1999 /
MK 1, 176)
In this video, we will see how to recover when the key code no longer works, and consequently, the car does not recognise it and won't start. Here’s …
Fiat Punto
(2005-2018 /
199, MK 3, Grandepunto , Punto EVO)
Below are the steps to reset the airbag light on the Fiat Punto Evo, as well as the Grande Punto and other models from the manufacturer. First, ensur…
Fiat Punto
(1999-2011 /
MK 2, 188)
In this video tutorial, you will learn how to reset the airbag warning light on the Fiat Punto. Before performing the operation, ensure you have reso…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Toll Tag Holder from the Car Windscreen
The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.162
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |