Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you activate the windshield wipers of the Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Windshield wipers

In order to activate the windshield wipers of the Fiat 500, first you need to insert the key into the ignition switch and turn it to turn on the instrument panel: once this is activated, you can pull down the lever on the right side of the steering wheel to adjust the wiper speed. To activate the windshield washer nozzles, you need to pull the lever towards you for a few seconds, and the windshield will be washed; to activate the rear wiper, you need to rotate the knob at the end of the same lever.

Posted on 17 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear windshield wiper of the Fiat 500 X
How to replace the rear windshield wiper of the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Today we will explain how to replace the rear windshield wiper blade of the Fiat 500 X. To perform this simple operation, we will use Bosch model h84…
How to replace the rear windshield wiper of the Fiat 500
How to replace the rear windshield wiper of the Fiat 500
Fiat 500 (2007-2024 / 312) Below we will discover the steps that will allow us to disassemble and replace the rear windshield wiper or rear wiper of the Fiat 500. First, move t…
Replacing Rear Wiper Blade on Fiat 500 Abarth
Replacing Rear Wiper Blade on Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) Today, I will show you a simple and really quick maintenance task: replacing the rear wiper blade on a Fiat 500 Abarth. First, you need to remove the…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 1957-1975 - Where can you find the window washer bag of the vintage Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos