Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Oil and Filter on Fiat Panda

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Oil filter

See other generations:
Video tutorial

Do you want to replace the oil and filter on a new model Fiat Panda? Follow these steps: lift the bonnet and secure it, then raise the car on a column lift or jack; unscrew the bolt from the oil sump, let the fluid drain into a disposal container, and refit the bolt on the oil sump.

Use a strap wrench to unscrew the oil filter and remove it (fit the new part).

Finally, top up with new fluid, and check the oil level multiple times with the metal dipstick until you reach the ideal measurement.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
Fiat Panda (2003-2012 / 169, MK 2) Let’s discover the procedure to perform routine maintenance by replacing the engine oil and oil filter on the Fiat Panda 169 4x4. First, lift the veh…
How to perform an oil change on my Fiat Panda?
How to perform an oil change on my Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) If you need to carry out maintenance on your 2004 Fiat Panda independently, this short guide will be useful. First, lift the vehicle and start by rem…
How to Change the Engine Oil and Filter on a Fiat Panda
How to Change the Engine Oil and Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To change the engine oil and filter on a Fiat Panda, it is advisable to allow the engine to reach its normal operating temperature, then switch it of…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos