Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil of the Fiat Ducato

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Engine oil

See other generations:
Video tutorial

Today we will explain how to replace the motor oil of the Fiat Ducato. First, we open the oil filler cap and pour the pre-change inside, in order to remove all residues; before using the detergent, let the vehicle idle for 5 minutes.

Pour the liquid and wait 10-15 minutes with the engine at idle, then proceed to the oil replacement. Lift the vehicle using a jack and stands.

Unscrew the nut and let the oil drain into a container, then unscrew the oil filter bolt to remove the box. Remove the filter and insert the new one, mount the box in its housing and screw in the nut of the cup. Lower the vehicle and pour about four liters of new oil into the oil tank.


Posted on 3 September 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil on Fiat Ducato
How to Change the Engine Oil on Fiat Ducato
Fiat Ducato (2006-2014 / X250) Change the used engine oil on your Fiat Ducato, here’s what to do. Raise the Ducato on a column lift, unscrew the oil sump bolt with a socket wrench,…
How to Change the Engine Oil and Oil Filter in the Fiat Ducato
How to Change the Engine Oil and Oil Filter in the Fiat Ducato
Fiat Ducato (2014-2026 / X290) Below is the procedure to perform routine maintenance by changing the engine oil and oil filter in the Fiat Ducato. First, drain the engine oil by un…
How to Change the Engine Oil and Oil Filter on the Fiat Ducato
How to Change the Engine Oil and Oil Filter on the Fiat Ducato
Fiat Ducato (2006-2014 / X250) Changing the oil filter and engine oil on the Fiat Ducato is a straightforward task that can be performed independently, thanks to this brief video t…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos